Refer to Diagnostic class (standard): 3
MsgFilter: Bit 1
The hardware provides an internal message logger that logs error-dependent controller deactivations. The next time the controller is started, the error logger is analyzed, and the cause of the error can be given in the message logger. In addition, a more specific message is indicated (8055 Controller message HW monitor) that can be enabled by the MsgFilter parameter and activated via the Logic Builder message logger.
|
Cause |
Solution |
|---|---|
|
DiagExtMsg defines the detected error in further detail (high or low voltage, high or low temperature, fan error, temperature sensor error):
|
Contact your local Schneider Electric service representative. |