The parameter sets the Sercos device identification mode. It is applied in the Sercos phase change from 2 to 3.
|
Value |
Data type |
Meaning |
|---|---|---|
|
SerialNumberController / 0 |
DINT |
The device is assigned via the serial number of the segment (see parameter SerialNumber). |
|
SerialNumberMotor / 1 |
DINT |
The device is assigned via the serial number of the motor. This parameter is only applicable to drive objects; it is not applicable to . |
|
TopologyAddress / 2 (default) |
DINT |
The device is assigned via its topological address (see parameter TopologyAddress). |
|
ApplicationType / 3 |
DINT |
The device is assigned via its application type (see parameter ApplicationType). |
|
SercosAddress / 4 |
DINT |
The device is assigned via its Sercos address (see parameter SercosAddress). |