The parameter represents the Sercos address to which the device has been assigned. The Sercos address is automatically assigned by the master during the phase-up of Sercos, provided that the device is not in the identification mode SercosAddress / 4 (see IdentificationMode).
The Sercos address can only be modified by manually writing the Sercos parameter IDN S-0-1040.
The function FC_SercosWriteServiceData can be used to modify the parameter.
|
Value range |
Data type |
Meaning |
|---|---|---|
|
(1…511) |
UINT |
The Sercos address to which the device has been assigned. |