8790 Module error detected

Description

Device reactions	Default reaction	Minimum reaction
Drive	D	E
Power supply	-	-

A module error is detected.

Ext. diagnosis	Meaning
`Com.` `Com. IOModule`	A loss of communication is detected between DIO8 module (optional module of Lexium 62 ILM Module) and Lexium 62 ILM Module. Contact your local Schneider Electric service representative.
`DIVCLK`	An error is detected while synchronizing with the Sercos cycle. Contact your local Schneider Electric service representative.
`drive disabled`	The Lexium 62 ILM Module, on which the DIO8 module (optional module of the Lexium 62 ILM Module) was configured is deactivated and the DIO8 module is activated (Enable = TRUE). Verify and correct if necessary the PLC configuration.
`int. error`	Contact your local Schneider Electric service representative.

NOTE: In certain cases, another diagnostic code or diagnostic class is entered in the message logger of the controller for DIO8 module and Lexium 62 ILM/Lexium 52 Drive onboard I/O modules in the message logger of the drive.